Free sample for Higher Bus Air Filters For Sale - retiform valve – DONGYI Detail:
FOR USE IN SHORT-STROKE COMPRESSORS AT HIGH ROTATIONAL SPEEDS
High efficiency and long service life
Resistant to gas impurities and oil sticktion
High operating temperatures
The CT valve is suitable for virtually all applications that employ short-stroke, high-speed gas compressors. Primary fields of operation include the transport, production and storage of natural gas. The valves also operate reliably and efficiently in a wide variety of processes in refineries and in the chemical and petrochemical industries.
The design has been tested in practice for years. The plastic valve plate, in conjunction with a spring wave washer, mitigates the opening impact. At high rotational speeds, the spring wave washer prevents oil sticktion of the valve plate. Closing springs on the outside guarantee largely wobble-free valve plate movement and consequently long valve service lives. The seat and flow guidance are resistant to conventional gas impurities. The CT valve can be used both in lubricated and non-lubricated operation.
The valve allows operation up to 1,800 rpm at an operating pressure of up to 350 bars, with a maximum differential pressure of 150 bar. The maximum operating temperature of 250ºC and diameters between 64 and 221 mm (2.5 and 8.7 inches), with a maximum lift of 2.8 mm (0.11 inch), allow a wide spectrum of applications. With the HydroCOM, continuously controlled operation is possible.
TECHNICAL DATA
CT Valve from to
Maximum Pressure 350 bar
Pressure Differential 150 bar
Temperature Range -20°C (-4ºF) +250 °C (+482F)
Rotational Speed 1800 rpm
Product detail pictures:
Related Product Guide:
What Is an Air Release Valve?
What’s a 2/2 Compressed Air Valve?
Adhering to the principle of "quality, service, efficiency and growth", we have gained trusts and praises from domestic and international client for Free sample for Higher Bus Air Filters For Sale - retiform valve – DONGYI, The product will supply to all over the world, such as: Bulgaria , Czech Republic , Panama , Our company sets up several departments, including production department, sales department, quality control department and sevice center,etc. only for accomplish the good-quality product to meet customer's demand, all of our products have been strictly inspected before shipment. We always think about the question on the side of the customers,because you win,we win!
By Diego from Israel - 2017.08.18 11:04
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Stephen from Austria - 2018.07.26 16:51